SPECIAL SOLUTIONS FOR THE ROAD

Cepsasfalt BT bitumen is an asphalt binder designed for warm mix fabrication. It includes waxes for viscosity reduction at high temperatures in order to reduce fabrication temperatures as well as energy comsumption and greenhouse gas emissions.

Elaster RAF AV (PMB 45/80-75) bitumen is a high performance polymer modified bitumed obtained by chemical crosslinking with elastomeric polymers that complieas with EN 14023 specification. It is suitable for the fabrication of high performance asphalt mixes as anti-crack systems, Porous Asphalt with high void content, high resistance to shear stress and rutting-proof mixes, SMA (no fibers need) and AUTL mixes. It has a minimum softening point of 75 ºC, extremely high cohesion and it is storage stable.

High-performance multi-grade asphalt bitumen It complies with the specifications set out in the National Annex to standard UNE EN 13924-2.

You can use it in anti-rut mixtures.

High performance multi-grade asphalt bitumen. It has a lower thermal susceptibility than the conventional alternative

Regener bitumen is an asphalt binder designed to be used in hot recycled asphalt mixes with medium-low reclaimed asphalt rate. Properties can be adapted depending on particularities of RAP and mix design.

Regener Plus Bitumen is a rejuvenating asphalt binder designed to be used in hot recycled asphalt mixes with medium-higt reclaimed asphalt rate. Properties can be adapted depending on particularities of RAP and mix design.

Fast setting modified cationic bituminous emulsion, in which the original binder is made of a bitumen modified with polymers, designed for its use in addition to the application of geotextiles to guarantee the waterproofing of the support on which they are applied and to avoid the reflection of cracks to the upper layers of the pavement.

Bituminous sealant for cracks and joints reparation in concrete paving. Juntoplast C is a homogeneous mixture of polymer modified bitumen, additives and mineral fillers which complies with the technical specifications stated in the EN 14188 standard.

Bituminous sealant for cracks and joints reparation in bituminous and concrete pavements. Juntoplast BT is a homogeneous mixture of polymer modified bitumen, mineral fillers and additives that allow its application at lower temperatures.

High-quality, multi-layer processing resistant to fuels, to apply on asphalt agglomerate paving and concrete pavements. Specially designed for toll areas, service stations and airports.

An oil-based mortar with acrylic fibers for concrete bridge deck waterproofing.